-40%
Polycarbonate Square Tube 1.0" Square x .080" Wall x 72" -088
$ 50.31
- Description
- Size Guide
Description
Polycarbonate Square Tube 1.0" OW x 0.840" IW x .080" Wall x 72" -088Thickness tolerance is
±0.008".
Temperature
Range:
-40° to 200° F
FDA, UL 94HB
These Polycarbonate tubes are extruded, therefore, they will have extrusion lines, from the extrusion process.
Extrusion lines appear as fine scratching. They are not as clear as glass or cast acrylic. They also have a blue edge tint.
265° F continuous use temperature. Polycarbonate has a glass transition temperature of about 147 °C (297 °F; 420 K), so it softens gradually above this point and flows above about 155 °C (311 °F; 428 K)
Cut to Length Tolerances +/- 1/8"
RETURN'S
Where we are at fault. Item not as described, damaged or an obvious error on our part is guaranteed a full refund, inclusive of any & all shipping
per our stated directions. RETURN DIRECTION’s; All returns MUST be in the original condition received.
All returns MUST be shipped in the same manner as we shipped originally.
ANY ADDITIONAL COST UP & BEYOND THE ORIGINAL COST, INCURRED IN RETURNING YOUR ITEM IS NOT REFUNDABLE. (if you choose to return an item at
a higher rate than we originally shipped to you? This portion is NOT refundable) Refunds due because of a no error on our part are completed as
an item refund only. Shipping is excluded. PLEASE feel free to contact us with any questions or concerns, as we strive for 100% satisfaction & happy customers.
Tubes less than full length (8 Ft) are cut on a band saw, and may have slight burrs, shavings, etc. Larger Diameters may not be perfectly flat or straight or perpindicular to the length due to blade taper/wandering.